• ELEC 1120: AC Fundamentals

  0.00 - 4.00 Credits

  Northeast State Community College

  
  AC Fundamentals emphasizes skills in selecting and using trigonometric functions to calculate values of Resistance (R), Inductance (L), and Capacitance (C) required to produce any desired voltage, current, and impedance in AC circuits. Students will also analyze R-L-C series, parallel and combination circuits and are required to verify the results of the calculations by proper use of laboratory test equipment and computer applications. Students are also required to calculate values of current and voltage for single-phase and three-phase transformers.Prerequisites & NotesPrerequisite: ELEC 11104 Credit Hours - 3 Lecture Hours - 2 Lab Hours (S)Note: Course not designed for transfer.
  ShareELEC 1120 - AC Fundamentals

• ELEC 1210: National Electric Code Int I

  0.00 - 4.00 Credits

  Northeast State Community College

  
  National Electric Code Interpretations I is an introductory study of the minimum NEC requirements pertaining to the installation of electrical conductors and equipment. The student must calculate conductor sizes, voltage drop, box fill, overcurrent protection, and determine the type, required number and location of outlets and switches. While practicing electrical safety per NFPA 70E, students will troubleshoot and install branch circuits in a neat and workmanlike manner.Prerequisites & NotesPrerequisites: None4 Credit Hours - 3 Lecture Hours - 2 Lab Hours (F)Note: Course not designed for transfer.
  ShareELEC 1210 - National Electric Code Int I

• ELEC 1310: Motors,Alternators, Generators

  0.00 - 4.00 Credits

  Northeast State Community College

  
  Motors, Alternators and Generators emphasizes both theory and application by requiring students to make all connections on DC generators and DC motors, three-phase and single-phase AC motors, and three-phase AC alternators. Students measure current, voltage, power and efficiency of each scenario and will be introduced to the programming, operation and control of variable frequency drives.Prerequisites & NotesPrerequisite: ELEC 1110 (S)4 Credit Hours - 3 Lecture Hours - 2 Lab HoursNote: Course not designed for transfer.
  ShareELEC 1310 - Motors,Alternators, Generators

• ELEC 2110: Transformers & Power Factors A

  0.00 - 4.00 Credits

  Northeast State Community College

  
  Transformers and Power Factor Applications emphasizes theory and application by requiring students to make connections on single-phase and three-phase transformers; calculate phase and line current, and phase and line voltage; and calculate efficiency, power factors of AC circuits and KVAR needed for power factor correction. Students will also calculate over current protection and conductor sizes per NEC requirements and verify transformer calculations with computer software.Prerequisites & NotesPrerequisite: ELEC 11204 Credit Hours - 3 Lecture Hours - 2 Lab Hours (F)Note: Course not designed for transfer.
  ShareELEC 2110 - Transformers & Power Factors A

• ELEC 2210: Magnetic Motor Control

  0.00 - 4.00 Credits

  Northeast State Community College

  
  Magnetic Motor Controls is a study of devices such as relays, contactors, solenoids, and motor starting methods including: full voltage starting, primary resistance starting, autotransformer starting, impedance starting, wye-delta starting, and part winding starting. Emphasis is on applications of jogging, plugging, timers, reversing starters and reduced voltage starting methods for motors. Additional emphasis is on the ability to read and draw straight line drawings for automated and complex control circuits.Prerequisites & NotesPrerequisite: ELEC 11104 Credit Hours - 3 Lecture Hours - 2 Lab Hours (S)Note: Course not designed for transfer.
  ShareELEC 2210 - Magnetic Motor Control

• ELEC 2310: National Elect. Code Int II

  0.00 - 4.00 Credits

  Northeast State Community College

  
  National Electric Code Interpretations II is a comprehensive study of the current NEC requirements pertaining to the installation of electrical conductors and equipment. The student will be required to calculate branch circuit, feeder, and service conductor sizes; calculate pull box and conduit fill; identify, troubleshoot, and safely install major types of electrical conductors and equipment in a neat and workmanlike manner. The installation of the major types of raceways, cables, and service equipment will be stressed.Prerequisites & NotesPrerequisite: ELEC 12104 Credit Hours - 3 Lecture Hours - 2 Lab Hours (S)Note: Course not designed for transfer.
  ShareELEC 2310 - National Elect. Code Int II

• ELEC 2350: Industrial Electronics

  0.00 - 4.00 Credits

  Northeast State Community College

  
  Industrial Electronics covers the basic principles of switching transistors; silicon controlled rectifier circuits; relay and timing circuits; photoelectric devices; unijunction transistors; DIACs; TRIACs; proximity devices; and rectification of single and polyphase power. In addition to demonstrating a working knowledge of industrial electronic controls, students are required to perform all relevant calculations, measurements and verifications by the proper use of lab equipment and computer software.Prerequisites & NotesPrerequisite: ELEC 11204 Credit Hours - 3 Lecture Hours - 2 Lab Hours (F)Note: Course not designed for transfer.
  ShareELEC 2350 - Industrial Electronics

• ELEC 2400: Siemens PLC Programming

  0.00 - 4.00 Credits

  Northeast State Community College

  
  Siemens PLC Programming covers the theory of operation and applications of Programmable Logic Controllers (PLCs) used in the process industry. Students will be required to develop basic PLC ladder programs and verify their operation in a lab environment by hardwiring components to the PLC. Programming will be performed via computer software. The operation of sensors and detectors used in PLC circuits will be emphasized.Prerequisites & NotesPrerequisite: ELEC 1120 or instructor’s permission.4 Credit Hours - 3 Lecture Hours - 2 Lab Hours (F)Note: Course not designed for transfer.
  ShareELEC 2400 - Siemens PLC Programming

• ELEC 2410: Allen-Bradley PLC Programming

  0.00 - 4.00 Credits

  Northeast State Community College

  
  Allen-Bradley PLC Programming covers the theory of operation and application of Allen-Bradley PLCs in the process industry by requiring students to develop PLC ladder programs using various instructions and mathematical functions. The application of analog circuits is also covered. Programming will be performed via computer software. Students are also required to hardwire components to the PLC and to verify the operation of their programs.Prerequisites & NotesPrerequisites: ELEC 1120 or instructor’s permission.4 Credit Hours - 3 Lecture Hours - 2 Lab Hours (S)Note: Course not designed for transfer.
  ShareELEC 2410 - Allen-Bradley PLC Programming

• ELEC 2990: Special Topics-Electrical Tech

  1.00 - 5.00 Credits

  Northeast State Community College

  
  Special Topics in Electrical Technology is an in-depth examination of a selected topic in electricity and may be repeated for credit when content varies.Prerequisites & NotesPrerequisites: NoneNote: Course not designed for transfer.
  ShareELEC 2990 - Special Topics-Electrical Tech